60mm Chain System
Falcon Chain conveyor systems move feed through a circuit at high speed, the flexibility of the chain allows it to be used in any situation. The feed is introduced into circuit via a hopper, material can be delivered at any point using different kinds of flow device (drop tubes, dispensers etc)
CHAIN
• Hardened Steel with nylon discs
DRIVE UNIT
• Hard wearing & compact
• Can be positioned any point in circuit
• Supplied with auto tension pulley
& safety switch
• Stainless Steel available
DROP TUBES & BENDS
• Plastic casing & metal shutter
• Manual, Rope Pull, Electric or Pneumatic
• Optional covers
• 30° Bends with bolt or slide on couplers
HOPPERS
• Galv or Stainless Steel
• Versions with extraction auger & motorised drive
• With agitator & flow regulation
• 1, 2, 3 way Hoppers
CORNERS
• 45°, 90°, 180° avail for vertical
& horizontal circuits
• Nylon or Aluminium casing with cast iron wheels
CONTROLS
• R2R , DOL or Mechanical Control Box
• Full Auto PLC & Weigh systems available.
Calculation of the maximum length of the circuit
| Capacity: | up to 2 Ton/hr |
|---|---|
| Motor: | 1.5 kw |
| Hoppers: | 1 hopper pulled by the chain equals 25 mtr |
| Length: | 300 meters (results depends on elevations, corners & drops) |
| Filling of System: | 50% of pipe @ 75% length |
| Chain Speed: | 24 mtr/ minute |
| Elevations: | Cleanout corner systems avail for vertical elevations |
| Feed: | Pellets ø4mm x 15mm long |
| Service: | Service and maintenance according to manuals. |
DRIVE UNIT
HOPPERS
CHAIN CONVEYOR
CORNERS
DROPS & DISPENSERS
PIPE
