4″ System (102mm)

FALCON chain conveyors 102 (100mm) are unique for their versatility. They can carry out very tortuous vertical and horizontal circuits up to a length of 350 meters with high capacity and extremely reduced power from 2 to 4 HP.

The chain is pulled through the circuit by a drive unit  then the feed is introduced into the system by means of a hopper with a vibrating wall that helps keep the material flowing. The direction of the pipe line can be easily changed by the 90°, 135° and 360° corners.
Feeding pipes are connected by the couplers with screws. The material can be discharged from the circuit at any desired location by manual or automatic drop tubes.

Calculation of the Maximum Length of the Circuit

Drive Unit

Chain Conveyor

Corners

Feed Pipe

Drops

Hoppers

  • Talc powder(2)
  • 20181105_210408
  • industrial corner
  • Brewery photo
  • Woods Grains 2 (1)
  • IMG_0547
  • 60mm Falcon
  • Bello Dairy July 2013 (17)